EP-C30 R

EP-C30 R

EP-C 30 R is a heterophasic polypropylene copolymer for injection moulding. The product offers an excellent balance of stiffness, impact strength and processability.
EP-C 30 R is largely used in the consumer, packaging and appliance industries for injection moulding applications that require a good mechanical properties balance.
Typical applications include household articles, toys, small containers, pails, crates, caps, closures, lids and thin-walled packaging for cold shelf presentation.
EP-C 30 R is also designed for demanding injection moulding applications such as automotive parts, wheels, garden furniture, chair shells and stadium seats.
EP-C 30 R is furthermore suitable for the extrusion of cast film for stationery.


PROPERTIES
METHOD (b) UNIT TYPICAL VALUE (a)
Physical properties
Melt flow rate (230 °C, 2.16 kg)
Specific gravity
ISO 1133
ISO 1183
Dg / min
g/cm3
7
0.9
Mechanical properties
Flexural modulus
Tensile strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
-20°C
Hardness Shore D
ISO 178
ISO R527
ISO R 527
ISO 180
ISO 868
N/mm2
N/mm2
%
kJ/m2
points
1150
26
10
8
6
68
Thermal properties
Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
ISO 306/A
ISO 75/B
ISO 4577
°C
°C
hours
151
88
360

EP-C 30 R is suitable for food contact.

a) Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumulated.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.