EP-D 60 R

EP-D 60 R

EP-D 60 R is a high molecular weight heterophasic copolymer for blow moulding and extrusion and is designed to produce items with superior toughness, even at low temperature.
EP-D 60 R exhibits excellent heat and detergent resistance.
Because of its excellent impact strength and its particular formulation, EP-D 60 R is well suited for extrusion blow moulding appliance components, wheels, under-the-hood automotive parts, toolboxes, suitcases and large containers.
Extrusion applications of EP-D 60 R include profiles, pipes and tough sheet for industrial applications. Sheet produced with EP-D 60 R is also well suited for thermoforming trays for cold storage.
EP-D 60 R can be compression moulded into thick sheet.


PROPERTIES
METHOD (b) UNIT TYPICAL VALUE (a)
Physical properties
Melt flow rate (230 °C, 2.16 kg)
Density
ISO 1133
ISO 1183
dg / min
g/cm3
0.4
0.9
Mechanical properties
Flexural modulus
Tensile strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
-20°C
Hardness Shore D
ISO 178
ISO R527
ISO R527
ISO 180
ISO 868
N/mm2
N/mm2
%
kJ/m2
points
1050
26
16
60
6,5
60
Thermal properties
Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
ISO 306/A
ISO 75/B
ISO 4577
°C
°C
hours
151
88
1800

EP-D 60 R is suitable for food contact.

a) Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumulated.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.