680 ADXP

680 ADXP

680 ADXP is a new polypropylene type which features an extremely high stiffness, high gloss, good transparency and improved characteristics at high temperatures.
It has been especially developed for extrusion - thermoforming and film applications where high rigidity, outstanding transparency and very good thermal characteristics are needed. Typical applications of 680 ADXP include transparent food containers, containers for high temperature filling as well as any applications where high gloss and high stiffness are required. The composition of the product complies with FDA norms and with regulations in force in major European countries conceming food contact applications. Further details can be supplied on request.


PROPERTIES
METHOD (b) UNIT TYPICAL VALUE (a)
Physical properties
Melt flow rate (230 °C, 2.16 kg)
Density
ISO 1133
ISO 1183
dg / min
g/cm3
3,5
0.9
Mechanical properties
Flexural modulus
strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
Hardness Shore D
ISO 178
ISO R 527
ISO R 527 
ISO 180
ISO 868
N/mm2
N/mm2
%
kJ/m2
points
2150
40
7
3
74
Thermal properties
Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
ISO 306/A
ISO 75/B
ISO 4577
°C
°C
hours
159
120
360

680 ADXP is suitable for food contact.

a) Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumlsted.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.