C 30 S
C 30 S is a polypropylene homopolymer with a good ﬂow properties and is particularly suitable for the extrusion of ﬁlm yam, monoﬁlament, cast ﬁlm and sheet. C 30 S combines outstanding process ability with good mechanical properties. C 30 S is particularly suitable to produce ﬁlm yam with the cast ﬁlm process. Film yam of C 30 S is used for baler twines, packaging twines and ropes.
C 30 S is well suited for the production of monoﬁlament used for instance in brush and broom ﬁlling and technical applications. Other applications of C 30 S are monolayer or coextruded ﬁlm for packaging, thin sheet for stationery folders and sheet for thermoforming.
C 30 S is also used for the extrusion of straws
TYPICAL VALUE (a)
|Melt ﬂow rate (230 °C, 2.16 kg)
|dg / min
Tensile strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
Hardness Shore D
ISO R 527
ISO R 527
|Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
C 30 S is suitable for food contact.
a) Values shown are averages and are not to be considered as product speciﬁcation These values may shift slightly as additional data are accumlsted.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.