T 30 G

T 30 G

T 30 G is a polypropylene homopolymer for injection moulding applications.
T 30 G combines high stiffness and fairiy good impact strength with good processability. The grade is suitable for a wide range of applications such as housewares, caps, closures, small containers, toys, parts for small appliances and components for the automotive industry.


PROPERTIES
METHOD (b) UNIT TYPICAL VALUE (a)
Physical properties
Melt flow rate (230 °C, 2.16 kg)
Density
ISO 1133
ISO 1183
dg / min
g/cm3
3,2
0.9
Mechanical properties
Flexural modulus
Tensile strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
Hardness Shore D
ISO 178
ISO R 527
ISO R 527 
ISO 180
ISO 868
N/mm2
N/mm2
%
kJ/m2
points
1450
34
13
5
71
Thermal properties
Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
ISO 306/A
ISO 75/B
ISO 4577
°C
°C
hours
155
110
360

T 30 G is suitable for food contact.

a) Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumlsted.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.