T 30 S
T 30 S is a polypropylene homopolymer particularly suitable for the extrusion of sheet for thermoforming, ﬁlm yam and monoﬁlament.
T 30 S combines outstanding processability with good mechanical properties.
T 30 S is designed to produce stiff sheet for high quality thermofonmings such as vending cups, packaging for dairy products and trays for fruit, biscuits and chocolates.
T 30 S is also particularly suitable to produce ﬁlm yam, with both cast and tubular processes.
Textile ﬁlm yams with a denier count of not more than 1100 to 1200 and are used for the production of carpet backings, bags, industrial fabrics, mats and artiﬁcial grass.
Film yam with a denier count ranging from 3000 to 28000 is used for baler twines, packaging twines and ropes.
T 30 S is also well suited for the production of monoﬁlament used for Instance for brush and broom ﬁlling and technical applications.
Another typical application of T 30 S is the extrusion of nets for various purposes.
TYPICAL VALUE (a)
|Melt ﬂow rate (230 °C, 2.16 kg)
|dg / min
Tensile strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
Hardness Shore D
ISO R 527
ISO R 527
|Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
T 30 S is suitable for food contact.
a) Values shown are averages and are not to be considered as product speciﬁcation These values may shift slightly as additional data are accumlsted.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.