T 36 F

T 36 F

T 36 F Is a polypropylene homopolymer for tenter BOPP fllm.


PROPERTIES METHOD (b) UNIT TYPICAL VALUE (a)
Melt Flow Rate (230 °C . 16 kg) (1) ASTM D 1238L Dg/min 3,2
Density (2) ASTM D 1505 g/cm3 0.9
Flexural modulus (3) ASTM D 790
N/mm2
1500
Tensile strength yield (3) ASTM D 638
N/mm2
36
Elongation at yield (3) ASTM D 638
%
12
Izod Impact Strength (notched) at 23°C
at -20°C (3)
ASTM D 256
J/m
45
Rockwell Hardness (3) ASTM D 785
R scale
90
Vicat softening point (3) ASTM D 1525
°C
153
HDT (0.46 N/mm2) (3) ASTM D 648
°C
95
Accelerated oven ageing air (forced circulation) at 150°C ASTM D 3012
hours
360

T 36 F is approved for food contact and medical applications. (5)

1) Measured at230°C under a load of 2.160 kg, with a standard nozzle having a diameter of 2.095 mm.
2)
Average nominal value referred to a tensile injection mo’;ded specimen, type I (ASTM D 638).
3)
Typical mechanical property values measured on standard specimens, injection moulded under conditions designed to minimise orientation and in-moulded stresses and in line with the conditions generaIy used by industrial converters. Specimens are concitioned at room temperature (ASTM D618 - Procedure A).
4)
The compositon of the product complies with the regulations in force in major European countries concerning polypropylene resins for use in food contact applications. Further details can be supplied on request.