V 30 G
V 30 G is a polypropylene homopolymer with good ﬂow properties for injection moulding and compounding applications.
V 30 G offers a medium-high ﬂuidity, easy mould ﬁlling and short cycle times. The ﬁnal items moulded with V 30 G exhibit good dimensional stability and high stiffness. The product is well suited for the production of thin-walled articles and articles with long ﬂow paths such as containers, boxes, caps, closures, household articles and toys.
V 30 G is also an excellent polymer base for compounding and master batches.
TYPICAL VALUE (a)
|Melt ﬂow rate (230 °C, 2.16 kg)
|dg / min
Tensile strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
Hardness Shore D
ISO R 527
ISO R 527
|Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
V 30 G is suitable for food contact.
a) Values shown are averages and are not to be considered as product speciﬁcation These values may shift slightly as additional data are accumlsted.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.