EP1 X 30 F

EP1 X 30 F

EP1 X 30 F is a slightly modified polypropylene random copolymer for the production of cast and water-quenched blown film. EP1 X 30 F is formulated with a general purpose package and does not contain any slip or antiblock agents. EP1 X 30 F is designed for quality packaging applications, either as monolayer film or as welding layer on coextruded structures. The product offers excellent processability. high clarity and gloss and good heat weldabilrty. The seal initiation temperature is about 136*C.
Because of its good heat weldabilrty, EP1 X 30 F is well suited for lamination to bioriented polypropylene films or other materials to form a welding layer.
Film produced with EP1 X 30 F is particularly suited for packaging of foodstuffs such as sweets, pasta, biscuits and snacks and for the packaging of books.
stationery, blankets, shirts and hosiery.
EP1 X 30 F is furthermore suitable for injection moulding caps and closures.


PROPERTIES
METHOD (b) UNIT TYPICAL VALUE (a)
Physical properties
Melt flow rate (230 °C, 2.16 kg)
Density
ISO 1133
ISO 1183
dg / min
g/cm3
8
0.9
Mechanical properties
Flexural modulus
Tensile strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
Hardness Shore D
ISO 178
ISO R 527
ISO R 527 
ISO 180
ISO 868
N/mm2
N/mm2
%
kJ/m2
points
1050
28
14
4,5
67
Thermal properties
Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
ISO 306/A
ISO 75/B
ISO 4577
°C
°C
hours
140
90
360
Optical Properties
Haze
Gloss (45°C)
MTM 17031
MTM 17021
%
%
0.6
88

a) Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumlsted.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.