EP2 S 12 B

EP2 S 12 B

EP2 S 12 B is a medium modified polyropylene random co- polymer specifically designed for blow moulding and sheet extrusion.
EP 2 S 12 B complies with the European Pharmacopeia. EP2 S 12 B offers excellent processability in extrusion blow moulding and can be converted on form-fill-seal equipment. The product is also suitable for the extrusion of film and sheet for thermoforming.
EP2 S 12 B offers a good impact strength, good clarity and high chemical resistance.
The main applications of this product are transparent bottles and containers forblood, intravenous solutions, pharmaceutical solutions, medicines and salves.
Other applications are packaging for health care products (toothpaste, mouthwash, saline solutions), film and sheet for thermoforming.


PROPERTIES
METHOD (b) UNIT TYPICAL VALUE (a)
Physical properties
Melt flow rate (230 °C, 2.16 kg)
Density
ISO 1133
ISO 1183
dg / min
g/cm3
1,8
0,9
Mechanical properties
Flexural modulus
Tensile strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
Hardness Shore D
ISO 178
ISO R 527
ISO R 527 
ISO 180
ISO 868
N/mm2
N/mm2
%
kJ/m2
points
900
25
14
10
65
Thermal properties
Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
ISO 306/A
ISO 75/B
ISO 4577
°C
°C
hours
135
80
360
Optical Properties
Haze
Gloss (45°C)
MTM 17031
MTM 17021
%
%
32
65

a) Values shown are averages and are not to be considered as product specification These values may shift slightly as additional data are accumlsted.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.