EP2 C 30 F
EP2 C 30 F is a medium modiﬁed polypropylene random copolymer for the extrusion of cast and water-quenched blown ﬁlm.
EP2 C 30 F is formulated with a general purpose stabilisation package and does not contain any slip or antiblock agents. EP2 C 30 F offers good processability, excellent clarity and gloss and exhibits very good heat weldability. The seal initiation temperature is about 130°C.
EP2 C 30 F is designed for quality packaging applications, either as monotayer ﬁlm or as welding layer in coextruded structures. Because of the excellent weldability, EP2 C 30 F is well suited for lamination to PP-ﬁlm or other materials such as PA, polyester or aluminium to form the sealing layer.
Film produced with EP2 C 30 F is suited for the packaging of foodstuffs such as biscuits, sweets, pasta, tea and for the packaging of stationery, shirts and hosiery.
EP2 C 30 F is also appropriate for the production of stationery folders.
TYPICAL VALUE (a)
|Melt ﬂow rate (230 °C, 2.16 kg)
|dg / min
Tensile strength yield
Elongation at yield
Izod Impact Strength (notched) at 23°C
Hardness Shore D
ISO R 527
ISO R 527
|Vicat softening point (9.8 N)
H.D.T. (0.46 Mpa)
Accelerated oven ageing in air
(forced circulation) at 150 °C
a) Values shown are averages and are not to be considered as product speciﬁcation These values may shift slightly as additional data are accumlsted.
b) ISO test methods are the lates under the societys current procedures. All specimens are prepared by injection moulding.